mill

A Pinwheel From One Square

*************************

Let's have fun and make a pinwheel !!!!!!!

Step #1 Print this page.

Step #2 Cut out the square.

Step #3 Use your scissors and cut all four lines from the corner to the line near the center.

Step #4 Don't crease the paper but bend the corners with the red specks so the red specks are over the center red speck.

Step #5 Press one straight pin or thumb tack through the 4 red specks and the center red speck.

Step #6 Stick the pin into a stick near one end. Make sure you don't pin the wheel to the stick to tightly, just enough to hold it in place.

Step #7 Hold the pinwheel facing into the wind. The wind does the rest!

*************************